HA2405GT-NF

HA2405GT-NF Hyperlink AMPAMPLIFIER

HA2405GT-NF Hyperlink AMPLIFIER 5Watt 2.4GHz Outdoor 802.11g (b/g) WiFi Amplifier

Description:

• IEEE 802.11g (b/g) Compatible
• Receive Bandpass Filter
• Active Power Control
• N-Female Connectors
• Includes DC Injector and Mast-Mount Hardware

HA2405GT-NF Hyperlink AMPLIFIER GT series are high power versions of Hyperlink's pole-top RF amplifiers for 2.4 GHz spread spectrum wireless LANs. High power and excellent linearity figure make it the highest performance wireless LAN amplifier available today. These WiFi amplifiers are compatible with 802.11g and 802.11b wireless LAN equipment. Hyperlink's APC (Active Power Control) circuit automatically adjusts the amplifier's gain to provide a constant output power regardless of cable length.

23dB Receive Gain
HA2405GT-NF Hyperlink AMPLIFIER "GT" series WiFi amplifiers improves range and reliability by placing up to full transmit power as well as 23 dB of receive gain (up to 28 dB available) directly at the antenna where it is most effective. This receive gain compensates for cable losses and actually increases the receive sensitivity of most wireless LAN radios. The unit can be configured to deliver up to full transmit power with as little as 5 mW of input power. This feature permits cable runs of several hundred feet with no degradation in operating range.
Our design features 10W FET allowing these amplifiers to deliver full rated linear output in 802.11g mode. 
The HyperAmp"GT" series amplifiers feature an all-metal weather-proof enclosure machined from a single block of aluminum, making it suitable for demanding commercial and military applications.
The included DC Power Injector provides power to the HyperAmp through the antenna cable, simplifying installation. Current-sensing circuits provide remote amplifier diagnostic LEDs. In addition, this unit provides effective lightning protection with multi-strike capability.

Streaming Media Ready
WiFi components used in a Streaming Video or Audio system work harder than ones carrying Data only. They are turned on for extended periods of time without the chance to cool off. Microwave devices are very sensitive to the heat generated from operating at high duty cycles. Most amplifiers, or for that matter many Radios, cannot pass Streaming Media content for extended periods of time without overheating. Some products were designed for Data only use and have no method of heatsinking. If you use them in a Streaming Media system, those products will self destruct or have their lifespan diminished. It would be the equivalent removing the Heatsink or Fans from your PC.
Hyperlink Technologies "Streaming Media Ready" amplifiers were designed from the start to survive the extreme conditions that Streaming Media imposes on an amplifier. Using proprietary heatsinking techniques, Hyperlink's Streaming Media amplifiers will remain at a safe operating temperatures for the most demanding Streaming Media applications, without the need for cumbersome heatsink plates, fins or fans.

Specifications:
HA2405GT-NF Hyperlink AMPLIFIER

 Product Shipping Weight: 0.77 Kgs